Texture and petrology of modern river, beach and shelf sands in a volcanic back-arc setting, northeastern Japan     

Atsushi  Noda 《Island Arc》2005,14(4):687-707

Abstract The focus in the present study is on characterizing spatial patterns of textural and petrological variabilities, and on evaluating mechanisms influencing the textural and petrological components of modern river, beach and shelf sands in a volcanically active back‐arc tectonic setting. Abashiri Bay and the surrounding area in eastern Hokkaido, Japan, has volcanic source land within a back‐arc region associated with subduction of the Pacific Plate beneath the Okhotsk (North American) Plate. A total of 41 river, beach and shelf sands were obtained for grain‐size and modal composition analyses. Multivariate analytical techniques of hierarchical cluster and principal component analyses were performed on the textural and petrological data for investigating relations among quantitative variables. On the basis of grain‐size data, four sedimentary zones were identified: zone I, palimpsest zone; zone II, relict zone; zone III, modern (proteric) zone; zone IV, coastal sedimentary zone. All sands are feldspatholithic and quartz‐deficient. The framework (quartz, feldspar and rock fragment) modal compositions were also classified into four clusters, A–D. The characteristic components of each cluster are as follows: cluster A, felsic volcanic rock fragments; cluster B, andesitic–basaltic volcanic rock fragments; cluster C, mixed or plagioclase; cluster D, sedimentary rock fragments. Almost all sands in western and central Abashiri Bay belong to cluster A, where the original compositions are influenced by Kutcharo pyroclastic flow deposits. Andesitic–basaltic lava and Neogene volcaniclastic and sedimentary rocks have a major influence on the compositions of shelf sands in eastern Abashiri Bay. The modal compositions are basically controlled by the source lithology. Compositional maturity (percentage of quartz to feldspar and rock fragments; Q/FR%) slightly increased, in order, from river (1.2), zone IV (coastal, 1.7), zone II (relict, 2.2), zone I (palimpsest, 3.6), to zone III (modern proteric, 7.0). Greater maturity in the recycled sediments is indicative of weathering under the sea or abrasion by transportation induced by sea‐level fluctuations, waves, or sea currents. Several controlling factors – (i) source lithological; (ii) mineralogical; (iii) climatic; and (iv) geomorphological controls – might still cause low maturity through all sedimentary zones other than the continental margin sands previously reported.  相似文献   

Vertical dynamic and thermodynamic characteristics of urban lower boundary layer and its relationship with aerosol concentration over Beijing   总被引：1，自引：0，他引：1  

ZHOU Mingyu  YAO Wenqing  XU Xiangde  YU Haiqing 《中国科学D辑(英文版)》2005,48(Z2)

By utilizing observational data from a 325 m tower of the Institute of Atmospheric Physics (IAP), Chinese Academy of Sciences (CAS) on March 19-29, 2001 and August 11-25, 2003, a comprehensive study was conducted on the vertical dynamical and thermodynamic characteristics of the urban lower boundary layer (ULBL) and its relationship with aerosol concentration over Beijing. Firstly, a comparative analysis was made on the gradient data (wind, temperature and humidity), ultrasonic data (atmospheric turbulences) and air-quality observations at different tower heights (47, 120 and 280 m). Secondly, a diagnosis was made to reveal the major features of normalized variances of velocity and temperature, turbulence kinetic energy as well as their relationship with aerosol concentrations. Furthermore, the characteristics of the ULBL vertical structure and the TSP concentration/distribution variations during a sand/dust weather process were also analyzed. The outcome of the study showed that under unstable stratification, the normalized variances of velocity (σu/u*, σv/u*, σw/u*) and temperature (σT/T*) at 47 and 120 m heights fit the Monin-Obukhov similarity (MOS) framework and the fitting formulas were given out accordingly. According to the stratification parameter (z′/L), the stable ULBL could be divided into 2 zones. With z′/L<0.1, it was a weakly stable zone and MOS framework was applicable. The other was a highly stable zone with z′/L>0.1 and the normalized velocity variances tended to increase along with higher stability, but it remained constant for normalized temperature variances. At daytime, the near-surface layer includes two heights of 47 and 120 m, while 280 m has been above it. The ULBL analysis in conjunction with a sand/dust weather process in Beijing in March 2001 indicated that the maximum concentration of Total Suspended Particulates (TSP) at 320 m reached 913.3 μg/m3 and the particles were transported from the upper to lower ULBL, which was apparently related to the development process of a low-level jet and its concomitant strong sinking motion.  相似文献   

松辽、加西盆地非震地球物理预测稠油藏技术方法对比研究     

徐宝慈  王喜臣  贾建秀  尹航 《吉林大学学报(地球科学版)》2005,(Z1)

松辽盆地同加拿大西部盆地同属环太平洋构造带控制的中生代内陆盆地,二者在构造环境、演化条件等诸多方面有着许多相似之处。松辽盆地的稠油、油砂藏有着很可观的远景储量。借鉴加拿大地球物理勘探经验及技术,勘探并开发松辽盆地斜坡地带稠油、油砂藏。  相似文献   

HOLOCENE CLIMATE VARIABILITY IN THE DENMARK STRAIT REGION - A LAND-SEA CORRELATION OF NEW AND EXISTING CLIMATE PROXY RECORDS     

CAMILLA S. ANDRESEN  SVANTE BJORCK 《Geografiska Annaler: Series A, Physical Geography》2005,87(1):159-174

ABSTRACT. Two well dated Holocene sediment records bordering the Denmark Strait region have been used to reconstruct past climate variability. The content of biogenic silica, classic and organic material and moss in a lacustrine record from Lake N14 has been used to infer past variability in precipitation and temperature in southern Greenland. Sedimentologic and petrologic composition of sand in a shelf sediment record from the Djúpáll trough is used to infer past variability in the northwestern storm activity on northwestern Iceland, which probably also affected the inflow of polar waters from the East Greenland Current. Our evaluation of these records with a number of previous studies from the region documents Holocene climatic optimum conditions peaking between 8000 and 6500 calendar years before present (cal yr BP). Mid-Holocene climate deterioration set in around 5000 cal yr BP followed by a further marked setback around 3500 cal yr BP. A stacking of climate variability on a centennial timescale from previous studies in the area shows a fairly good correspondence to the timing of marked cold and warm events as evidenced from the Lake N14 and the Djúpáll trough records. Cooler periods are explained as the response to marked incursions of ice-laden polar water from the Arctic Ocean to the Denmark Strait region. Cool northerly and northwesterly winds along the East Greenland coast in relation to frequent strong atmospheric low pressure in the Barents Sea, coupled with strong high pressure over Greenland, would have favoured southward export of polar waters. A comparison with the proxy records of nuclide production (¹⁴C and ¹⁰Be) suggests that solar activity may have had some influence on the atmospheric pressure distribution in the Denmark Strait region.  相似文献   

Transport rate of calcareous sand in unidirectional flow     

DAVID A. SMITH  KWOK FAI CHEUNG 《Sedimentology》2005,52(5):1009-1020

This paper examines the transport of calcareous sand in unidirectional flow and its prediction through existing sediment transport models. A flume experiment of four sand samples collected on Oahu, Hawaii, provides 29 sets of sediment transport data in the bed-form and suspended transport stages. The measured transport data are compared with direct predictions from four energy-based transport models developed for siliceous particles. Corrections for the grain-size, fall velocity, and critical velocity of calcareous sand based on recent research are applied to the models and the results are compared with the direct calculations and measured data. The comparison illustrates the important role particle shape plays in the transport of calcareous sand. All four sediment transport models give consistent predictions and good agreement with the majority of the measured data. Two of the models respond positively to the corrections in both the bed-form and suspended transport stages indicating that such an approach may provide an interim solution for the transport of calcareous sand.  相似文献   

Influence of vegetation on aeolian sand transport rate from a backshore to a foredune at Hasaki, Japan   总被引：1，自引：0，他引：1  

YOSHIAKI KURIYAMA  NORIO MOCHIZUKI†  TSUYOSHI NAKASHIMA‡ 《Sedimentology》2005,52(5):1123-1132

The influence of vegetation on aeolian sediment transport rate in the region from a backshore to a foredune was investigated at the Hasaki Coast in Japan, where an onshore wind was predominant and the creeping beach grasses Carex kobomugi and Calystegia soldanella were major species. The comparison of cross-shore distributions of the cross-shore component of aeolian sand transport rate with and without vegetation, which were estimated on the basis of the beach profile changes and a mass conservation equation, showed that the creeping grasses influenced the aeolian sand transport rate. The landward aeolian sand transport rate rapidly decreased landward from the seaward limit of vegetation when the grasses grew. The aeolian sand transport rate reduced by 95% with a vegetation cover of 28%. On the other hand, when the grasses were absent, the landward aeolian sand transport rate did not decrease near the seaward vegetation limit, but near the foot of the foredune.  相似文献   

Simplified Method for the Assessment of the Stiffness Anisotropy of Rocks at Small Strains     

K. Shin 《Rock Mechanics and Rock Engineering》2005,38(1):41-58

Summary A new, practically applicable method for characterizing the stiffness anisotropy of rocks is presented. The anisotropy of geo-materials is often ignored in engineering applications, with potentially serious ramifications, because of the number of parameters required for characterization. The elastic anisotropy has often been considered to be a function of mathematical symmetry, and the restrictions due to layering, microcracking and granularity of the materials have not been considered in the assessment of the anisotropy. The practicality of the method proposed here is achieved by rationally reducing the number of independent anisotropy parameters, typically 9 for orthotropic anisotropy, to a system of 4 independent parameters through a systematic theoretical and experimental analysis of these structural restrictions. These 4 parameters are shown to be sufficient for describing the anisotropy of some rocks and sands at small strains, and parameter determination by back-analysis is demonstrated to be stable using appropriate measurement systems involving 9 elastic wave velocities even when the directions of anisotropic axes are unknown and the velocity data contains appreciable error.  相似文献   

西藏直孔水电站大坝混凝土防渗墙超前支护成槽试验研究及施工     

马邦凯  牟兴华  蔡海燕 《探矿工程》2005,32(12):3-5

在西藏直孔水电站松散砂卵石地层混凝土防渗墙成槽施工中，结合坝基水文地质及工程地质特点，创造性地提出了超前支护成槽方案，通过三维应力模拟和渗透试验，结合现场生产试验，对原方案更进一步完善，在施工中加以应用获得了成功。  相似文献   

Genealogy of hypoplasticity and barodesy          下载免费PDF全文

Dimitrios Kolymbas  Gertraud Medicus 《国际地质力学数值与分析法杂志》2016,40(18):2532-2550

This article is an attempt at providing an insight into the development of hypoplasticity (including barodesy, which is a recent development of hypoplasticity) as a theory elaborated since 1977, when the first version was published by the first author, until present. The multiplicity of the many versions published since then is hard to overlook. This article presents a review and insight into the evolution of a theory and the struggle to formulate a satisfactory constitutive law. Among the many proposed versions, we focus on those ones that can be seen as changes of paradigm. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay     

《Applied Ocean Research》2019

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.  相似文献